Demonstration Speech About How To Ride A Motorbike

How to ride a motorbike

Your Name (First M. Last)

School or Institution Name (University at Place or Town, State)

.

Introduction:

Bike riding is a skill that one must learn, and it's a kind of skill that one can only have after getting proper training and self-determination; otherwise, he could be at risk of his/her life.

“Safe” motorbike riding is one of the main things that one should be concerned about as life is the most precious thing.

Every one of us wants to know how to ride a motorbike as, for mostly it’s a basic necessity and for few it’s an adventure.

Everyone should know how to ride a motorbike, as it’s a skill and skill of every type pushes you closer to perfection.

For knowing how to ride a bike, one must have the initial safety training. One should also know about the gears, brakes, clutches and other important motorbike operating tools.

After learning about the main tools of a motorbike, give ignition and shift the gear to first.

Release the clutch slowly and accelerate the motorbike with pace and hold the handlebar carefully and keep riding it gradually. Stop the motorbike, make the gear neutral and repeat the whole process.

Body:

Motorbike helmet is the most important equipment that assures your safety on the bike. Put on all your safety items for riding a bike i-e, jacket, gloves, and boots, etc. Safety comes first in all matters.

Learn about all the main parts of the bike along with knowing their use so that you could control the motorbike when you feel something is going wrong.

After ignition, be focused on how to maintain a balance, focus on the clutch brake and let the engine run for a few minutes before accelerating the bike.

Look at the speedometer on the motorbike and don’t accelerate the motorbike in the start.

Keep a balance and release the clutch gradually while shifting the gear from first to second, third etc.

Don't release the clutch all of a sudden and keeping releasing it slowly; otherwise, the bike would stop.

As ingredients are must for making a dish; likewise, it is essential to know about operating tools that assure safety when it comes to motorbike riding.

A person may ignore initial training for safety, but electronic bike operating tools urges the volunteer to know about these tools for applying them at the right time.

Ignition is must for bringing the engine from inactive to active state and unless the engine or ignition gets off, you can keep practicing.

Knowing how to ride a motorbike, would be only a complete success when you are equally concerned with your safety, and you should be focused that motorbike won't get off as re-ignition would break your flow of learning how to ride a motorbike.

Acceleration should be a gradual thing to do by slightly releasing the clutch.

Bike should be given acceleration attentively as if you accelerate the motorbike at wrong time, the bike may stop or go out of control.

You cannot ride a motorbike without knowing about its electronic parts, as it is important to know which electronic tools should be applied to speed up or stop the motorbike.

Be careful about when to apply friction disc plates and when to push the accelerator with peace of mind.

Ignition should be done once, and you should try not to let the motorbike gets off where you need to ignite it again as re-ignition would discourage you.

Ignition should be controlled by maintaining a focus on how much acceleration should be given to bike.

One of the toughest things while learning how to ride a motorbike is that how well one controls acceleration of motorbike as it would define how good biker you can be.

Accelerate the motorbike where you feel like it is about to stop and be more careful about changing the gear as accelerating and gear changing goes hand in hand. Keep practicing, as it is said that practice makes a man perfect and one day you would become a good motorbike rider.